Reverse Osmosis Systems

4in ro copy ro system basic

Agape Water Solutions, Inc. provides RO Systems which utilize semipermeable membranes to purify water. Membranes are manufactured by companies such as Hydranutics and Dow Filmtec. The spirally wound membranes are housed inside a round pressure vessel. Water pressure is applied at the membrane inlet to remove disolved solids from the feed water. As the water flows across the outside of each membrane, the pressure drives pure water through the membrane and purified water exists through the internal permeate tube. The water remaining outside the membrane is concentrated typically sent to drain.

Photo Courtesy of Dow Chemical Company

Agape Water Solutions offers well designed, trustworthy reverse osmosis systems from less than 1 gpm to 1 million gallons per day per skid. All systems are manufactured under a documented standard Quality Control System to ensure a reliable product arrives.

When purchasing an Reverse Osmosis system, it is very important that the technical application is reviewed by qualified and experienced experts. There are many factors which need to be analysis in selecting components such as membranes, pumps and piping that may not always work. Just a few of the factors include the nature of the water (such as surface water, well water, waste water, chlorinated city water), flux (gpm per square foot of membrane area), temperature, concentrate flow for each membrane, scaling potentials, fluid velocities and many other factors.

We provide complete customer satisfaction through:

Well Designed Reverse Osmosis Systems
Fast Delivery
Prompt Service
Technical Support
Application Assistance
Project Management Reports
Exceeding Performance Expectations

Agape Water Solutions, Inc. (215) 631-7035