Ionpure VNX

The VNX module uses a "round disc" design to reduce the cost of building high flow rate EDI systems and to make it easy to choose a clean, environmentally compatible technology over chemically regenerated mixed bed ion exchange systems. Higher flowrate EDI modules result in easier piping and system assembly by reducing the number of modules required.

 

In both the LX and VNX, the spacers are stacked up in a conventional plate-and-frame arrangement, with alternating product and reject compartments (see Exploded Views below). This configuration gives much more even distribution of both fluid flow and current flow than some other configurations, such as spiral wound. This is very important for both performance and module longevity

 

VNX-25-2 -NEW!!!
25 gpm nominal flow rate per module

>10 to 16 megohm-cm product quality guaranteed 

90-95% water recovery

5, 10 or 20 ppb silica

 No Concentrate Recirculation or Brine Injection  

VNX-50-2
50 gpm nominal flow rate per module

>10 to 16 megohm-cm product quality guaranteed 

90-95% water recovery

5, 10 or 20 ppb silica

 No Concentrate Recirculation or Brine Injection

 

VNX-50-2 data sheet

 

VNX-E

>17.5 or 18 megohm-cm product quality guaranteed 

98.5-99% water recovery

95% removal of boron and silica

99.8% removal of sodium and chloride

No Concentrate Recirculation or Brine Injection 

 

VNX-EX >17.5 or 18 megohm-cm product quality guaranteed  95-97.5% water recovery 99% removal of boron and silica 99.9+% removal of sodium and chloride No Concentrate Recirculation or Brine Injection